top button
Flag Notify
Site Registration

TTI Bundling In Lte

+5 votes
1,482 views
  1. What happens to data already stored in UPLINk & Downlink Buffer when TTI Bundling Is triggered.???
  2. HArq RTT & BUNDLE Size
  3. TTI Bundling Configuration at both ENB & UE side.??
  4. DCI0 info for particular UE in BUNDLE size TTIs interval ???
  5. Role of Uplink & Downlink Scheduler at eNB side.
posted Oct 24, 2013 by Luv Singh

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button
Are these 5 questions or 1. Would be great if you can edit the question and possible ask to the point, so that people can respond.
Hi.Salil , all question are related to same topic i.e TTI Bundling.

1 Answer

+1 vote

I am not sure about downlink but for uplink data due to poor radio channel condition ue may need to re-transmit packets for real time application packet (like VoIP) which is not acceptable.

To be decoded successfully a transmitted packet, UE sends same transport block four time consequently with different coding which is also known as TTI bundling. eNodB sends HARQ for a bundle.

RRC layer at eNodeB enable/disable TTI bundling for an UE. please check MAC-main config which is carried by RRC Connection Reconfiguration message.

I think only uplink scheduler has to care care of since TTI is associated with UL-SCH configuration but not sure.

answer Oct 24, 2013 by Vimal Kumar Mishra
@Vimal : Thanx for the comment but what about retransmission ??
what shoud be HARQ RTT ?? And what about Downlink Harq ??
While testing some LTE network, I found that TTIBundling = True which is part of RRCreconfiguration Message, I observed that eNodeB is triggering X2-HO with source and target cell ID as same. Is it right behaviour to enable this
Please state your question clearly.
Similar Questions
+2 votes

Is TTI bundling enabled by default or on a specific condition enabled ?

0 votes

Will ENB sends 4 ack/nack or how this will be handled?

...