top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

LTE: Why does need a bearer of QCI 5 to exchange SIP signalling messages ?

+3 votes
942 views
LTE: Why does need a bearer of QCI 5 to exchange SIP signalling messages ?
posted Dec 4, 2015 by Ganesh Kumar

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

+1 vote

A LTE subscriber may use different types of applications. Each application has different packet delay budget and packet loss error rate requirements. Usually network establishes non-GBR bearer (Packet Delay - 300 ms and (1/1000000) packet error loss rate) for the internet access bearer by an UE.

For IMS signalling and IMS voice data different packet delay budgets (100 ms) and packet error loss rate 1/1000000) are defined . If you see IMS packet delay budget is different from the normal internet bearer that is the reason to establish a new bearer which fulfill the requirement of IMS signaling. Along with IMS signalling bearer, another bearer with QCI "1" need to establish .

answer Dec 5, 2015 by Harshita
Similar Questions
+2 votes

Is it mandatory to establish a separate default bearer to exchange IMS signaling messages between UE and IMS network nodes ? Can't internet default bearer be used for the same ?

+1 vote

QCI 5 is mandatory for IMS SIP Signalling? What If Network assign different QCI (Say 6 or 8) for IMS Default Bearer? Will SIP Signalling still flow?

+1 vote

In one of the articles it was mentioned "BYE" SIP message routes end to end and by pass the SIP proxy server. What is it mean ? and when SIP proxy servers release the resources that was reserved during the session establishment ?

...