top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

Difference between default bearer and normal bearer

+1 vote
2,308 views

Can someone explain the following -
1. Default bearer.
2. Dedicated bearer
3. EPS Bearer and its component

posted Jul 27, 2013 by Abhay Kulkarni

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

2 Answers

+6 votes
 
Best answer

EPS stands for Evolved packet system. whole LTE system is developed to provide all types services through packet switching. To achieve this GTP (GPRS tunneling protocol is being used). GTP is application layer protocol which differentiate session based on TEID (tunnil end identifier). UDP is used as a transport layer protocol. A bearer is a pipe that carry data from one node to another node. There are two types of GTP messages used one for control plane and one for user plane. EPS bearer has following components like TEID , Transport layer address, etc.
Please see following figure:

      radio bearers                            GTP bearers                                     GTP bearers

UE <------------------------------>enb<---------------------------------->SGW <---------------------->PGW<------->Internet

The pipes, which are carrying data from PGW to UE and vice versa called EPS bearer.
when data reaches at PGW from external world it process and create a GTP-U packet and sent to SGW.
SGW does the same thing it remove the GTP-U header received from PGW and create a new GTP-U header then forward packet to eNB. Once eNB receives GTP-U packet it removes header GTP-U header and then PDCP layer at enodeb performs IP header compression and ciphering and map to logical channel then message sent to UE through radio channel. radio bearers identified by bearer Identity (1-32) and logical channel identity(3-11).

Default bearer is one of the main bearer which is created at the time of initial attach procedure or at the time of new PDN connection. Default bearer represents a PDN connection and exists until UE gets detached from network or UE initiated PDN dis-connectivity explicitly or network force fully trigger release for the default bearer due to policy control. Default bearer is a non-GBR bearer and provide always on IP connectivity.

Dedicated bearer is created when the requested service can't be fulfilled through default bearer. Some services required a high level of QoS like voice call. so network create a dedicated bearer with required QoS . Dedicated bearer may be Non-GBR or GBR depend of qci(QoS class identifier) value. dedicated bearer can be created/release based on requirement but default bearer is created only all on IP connectivity and released only at the time of detach/PDN disconnection.

Note: Every dedicated bearer is always associated with default bearer(which is know as linked EPS bearer).

answer Jul 27, 2013 by Vimal Kumar Mishra
+1 vote

There is nothing called normal bearer let me describe the default and dedicated bearer here
Default Bearer in LTE
When LTE UE attaches to the network for the first time, it will be assigned default bearer which remains as long as UE is attached. Default bearer is best effort service. Each default bearer comes with an IP address. UE can have additional default bearers as well. Each default bearer will have a separate IP address. QCI 5 to 9 (Non- GBR) can be assigned to default bearer.

Dedicated Bearer
To put it simple, dedicated bearers provides dedicated tunnel to one or more specific traffic (i.e. VoIP, video etc). Dedicated bearer acts as an additional bearer on top of default bearer. It does not require separate IP address due to the fact that only additional default bearer needs an IP address and therefore dedicated bearer is always linked to one of the default bearer established previously. Dedicated bearer can be GBR or non-GBR (whereas default bearer can only be non-GBR). For services like VoLTE we need to provide better user experience and this is where Dedicated bearer would come handy. Dedicated bearer uses Traffic flow templates (TFT) to give special treatment to specific services

answer Aug 16, 2013 by anonymous
When do we need additional default bearer? Do we get additional IP address? If we get then which IP address is used for communication??
Similar Questions
+1 vote

Which NE stores the details of Default and Dedicated bearer details for all the UE's?

Question:1:- For example, UE1 has 1 default and 3 dedicated bearers. Which NE stores this information and based on what parameters, the bearers are mapped?

Question:2:- When UE is accessing gmail.com, based on what parameters the bearer will be selected, either Default or Dedicated for gmail.com will be decided?

+3 votes

In what scenario bearer modification/update will be triggered.

+5 votes

What is the difference between Modify Bearer Request and Update Bearer Request and when these messages are used?

+2 votes

Can someone point out the difference between SGW initiated and PGW initiated dedicated bearer?

...