top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

Could any one please explain in detail about timing advance in UMTS?

+2 votes
3,651 views
Could any one please explain in detail about timing advance in UMTS?
posted Dec 26, 2014 by Shivaraj Kenche

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

0 votes

Transmission delay is unavoidable in the radio interface. If the mobile station moves away from the base station during a call, the further distance the more delay. (In WCDMA i.e. 3G it is called Propagation Delay.)

If the delay is too high, the timeslots of the signal from a certain mobile station and that of the next signal from another mobile station received by the base station will overlap each other, thus causing inter-code interference. To avoid this, during a call, the measurement report sent from the mobile station to the base station carries a delay value. Moreover, the base station should monitor the time when the call arrives and send an instruction to the mobile station via the downlink channel every 480ms so as to inform the mobile station the time of advance transmission. This time is the TA (timing advance), which ranges between 0~63 (0~233μs ). The TA value is limited by the timing advance code 0~63bit of the GSM system. Therefore, the maximum coverage distance of the GSM is 35km. Its calculation is as follows:

1/2*3.7 μs /bit*63bit*c=35km

{In the formula, 3.7μs /bit is the duration per bit (156/577); 63bit is the maximum bit number of the time adjustment; c is the light speed (transmission speed of the signal); and ½ indicates that the go and return trip of the signal.}

According to the above description, the distance corresponding to 1bit period is 554m. Influenced by the multi-path propagation and MS synchronization precision, the TA error may reach up to about 3bit (1.6km).

answer Dec 30, 2014 by Salil Agrawal
Really it is very helpful then what about propagation delay in UMTS does it have any value like TA in LTE  is 0.52 microsec
Similar Questions
+1 vote

I have worked in LTE technology and observed the data rate through LTE network. We know , LTE deployment is on going and it will take few years to roll out completely in India. When a LTE UE attaches to network and handover to UMTS due to mobility then is there any change in data rate ? If yes, then how this change is communicated to UE. I mean to say what signalling messages exchange in network ?

...