top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

What can be the reason other than periodic UE tracking by having Periodic TAU procedure?

+3 votes
349 views

It is well understood that Periodic TAU is used by MME to track UE location at the granularity of cell and tracking area.

Other than that, is there any reason of having periodic TAU procedure ?

posted Oct 12, 2014 by Upma

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

2 Answers

+1 vote

As per my understanding, One complete LTE network is not always uni-formally divided its network area in the terms of cell size or tracking area size. A cell belong to dense area may have a less cell coverage as compare to a cell belong to rural area. For the better network planning, MME may not ask all UEs to always report periodically its current tracking area. So it is really up to MME, when to start period or non-periodic tracking area procedure for an UE.

answer Oct 12, 2014 by Harshita
0 votes

First, I would like to explain what is the need to tracking area procedure and it's possible uses.

LTE network has concept of cells and tracking area. A LTE operator managed it's network using cell Id and tracking areas. One tracking area may cover set of cells or sites. Usually, network operator doesn't like too large tracking area or even too small.

MME may ask UE to report periodically its tracking area. One point to note down here, by using tracking area update procedure, MME came to know about location of an UE at the cell level as well. Assume an UE attaches to the network using a cell which belong to Tracking area code -1 and other cell belong to the same eNodeB belongs to different Tracking area code -2. In that scenario, non-periodic TAU procedure would help to network by avoiding a lots of signalling since whenever UE moves from cell1 to cell 2, it executes TAU procedure.

Now assume, there are 10 eNodeB and all the cells belong to eNodeB having same tracking area . In that case, periodic-tracking area update would be beneficial. Whatever I have mentioned it's my personal thoughts/understanding of the LTE system.

I was realizing another reason that urban area' s may have smaller cell size (to support more capacity as per) and rural may be even large cell. Now consider a scenario, A LTE UE attaches to network in urban area and moving towards rural area, in that case, when UE reports its current location (cell in overlapping zone - urban to rural), MME stops periodic tracking area and informs to UE in TAU accept message. This is also my understanding.

reference: http://www.lteandbeyond.com/search/label/TAU

answer Oct 12, 2014 by Salil Agrawal
Similar Questions
0 votes

I would like to know when M-TMSI is generated and allocated to the UE by MME during TAU procedure, and which message is concerned.

0 votes

There are two types of tracking area update procedures in LTE, one is known as periodic and the other one is aperiodic.
I want to know in either case (periodic/aperiodic), when MME receives TAU request from UE, does it re-establish all the bearers again or it just completes TAU signalling and UE goes to idle mode again ?

+3 votes

There are two ways for tracking area update procedure to get triggered from UE to network . One is known as periodic and other one as non-periodic.

...