top button
Flag Notify
    Connect to us
      Facebook Login
      Site Registration Why to Join

Facebook Login
Site Registration

What are the transmission mode enb sends to UE in RRC connection setup and rrc connection reconfiguration?

0 votes
124 views
What are the transmission mode enb sends to UE in RRC connection setup and rrc connection reconfiguration?
posted Mar 7 by Gnanendra Reddy

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

1 Answer

0 votes

Transmit diversity is by default Transmission mode in RRC connection setup. It may or may not change in Reconfiguration to TM3 or TM4 based different transmission mode satisfied conditions.

answer Mar 7 by Suchakravarthi Sripathi
@Suchakravarthi Sripathi plz share  some details about TM3 OR TM4.
Agreed with but there is also another scenario
UE can detect eNB Antenna configuration right after power on and before dedicated channel establish (before RRC Connection Setup or before RRC Channel Reconfiguration) by during PBCH decoding.
PBCH carry the information about the antenna configuration (the number of Antenna ports being used for a cell). But if you look at the MIB message itself you wouldn't see any information elements about the number of antenna ports. Then how the PBCH can carry the antenna configuration in it ?

It is done by using special CRC mask (the number of bit stream being masked(XORed) over the CRC bits. Number of CRC bits for PBCH is 16 bits, so the length of the CRC mask is 16 bit as well. Following tables shows the types of CRC mask representing each of the antenna configurations.
You can refer 36.212 Table 5.3.1.1-1.
Thanks,
Sambit Routray
Agree with you.
UE can detect eNB Antenna configuration right after power on and before dedicated channel establish (before RRC Connection Setup or before RRC Channel Reconfiguration) by during PBCH decoding.
PBCH carry the information about the antenna configuration (the number of Antenna ports being used for a cell). But if you look at the MIB message itself you wouldn't see any information elements about the number of antenna ports. Then how the PBCH can carry the antenna configuration in it ?

It is done by using special CRC mask (the number of bit stream being masked(XORed) over the CRC bits. Number of CRC bits for PBCH is 16 bits, so the length of the CRC mask is 16 bit as well. Following tables shows the types of CRC mask representing each of the antenna configurations.
You can refer to 36.212 Table 5.3.1.1-1 : CRC mask for PBCH
Thanks
Sambit Routray
Similar Questions
Contact Us
+91 9880187415
sales@queryhome.net
support@queryhome.net
#280, 3rd floor, 5th Main
6th Sector, HSR Layout
Bangalore-560102
Karnataka INDIA.
QUERY HOME
...