top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

Why QCI 9 and QCI 5 are always established and deactivated together?

+1 vote
3,176 views

Hi,

In H// RAN QCI 9 and QCI 5 are always established and deactivated together for VoLTE provisioned subscribers for any Internet/data activity/inactivity. So QCI 5 attempts are almost same as QCI 9 attempts for a VoLTE subscriber. It seems to be unnecessary as we need QCI 5 only during VoLTE session. The benefit could be fast VoLTE setup if UE is already in RRC connected state due to data activity. I want to know if it is as per 3GPP standard? If yes then I would appreciate the reference document number.

Thanks.

posted Nov 5, 2017 by Faisal Adeem Siddiqui

Share this question
Facebook Share Button Twitter Share Button LinkedIn Share Button

2 Answers

–1 vote

I went through various references and found that QCI "5" is for IMS signalling only.
Another thing what I noticed here is few parameters such as packet delay budget and priorities are different for these two QCIs.
References:
http://www.sharetechnote.com/html/Handbook_LTE_QCI.html
https://en.wikipedia.org/wiki/QoS_Class_Identifier
http://www.bectechnologies.net/main/newsletter_images/QoS.pdf

answer Nov 5, 2017 by Harshita
I think you didn't understand the question.
–1 vote

Whenever ue moves from idle to connected mode, ue resumes all bearers those were established before moving to idle mode. This happens as per 3gpp and can get more detail in 23.401 section 5.3.4 Service Request procedures.

When ue moves connected to idle mode on the basis of data inactivity timer expiry, in this case enb deletes ue context from enb and informs ue and core nw about ue context release. More detail can get in 36.331 and 36.413.

answer Nov 7, 2017 by Veer Pal Singh Yadav
Similar Questions
+1 vote

QCI 5 is mandatory for IMS SIP Signalling? What If Network assign different QCI (Say 6 or 8) for IMS Default Bearer? Will SIP Signalling still flow?

+6 votes

I was going through IMS call flow and came to know that an IP sec tunnel is established between UE and P-CSCF . I could not find out reasoning behind it.

+1 vote
+1 vote

Redirection (3xx), Client failure (4xx), Server failure (5xx) and Global failure (6xx) in which scenarios these codes are used ?

...