top button
Flag Notify
    Connect to us
      Site Registration

Site Registration

Why SIB2 should be first entry in the list of SI messages in schedulingInfoList ?

+3 votes
273 views
Why SIB2 should be first entry in the list of SI messages in schedulingInfoList ?
posted Oct 7, 2013 by Neeraj Mishra

Looking for an answer?  Promote on:
Facebook Share Button Twitter Share Button LinkedIn Share Button

Similar Questions
+2 votes
Why Security Should be needed to Initiate RRC Connection Re-establishment?

Upon detecting Radio Link Failure UE will do RRC Connection re-establishment but to do RRC Connection re-establishment security should be activated in UE, otherwise UE will go Idle mode.So here(After detecting RLF) we are resetting all PHY,MAC,RLC,PDCP Configurations but why we are making security should be there to do RRC Connection re-establishment.

+2 votes
Should eNB broadcas MIB & SIB messages after CELL DOWN operation?

If CELL DOWN is performed with an eNodeB, the RF goes down gradually rather than instantly. Should it re-schedule and broadcast the MIB and SIB messages during that time?

+3 votes
When S1 HO is initiated by source eNB admin down, what should be the value of ac-BarringFactor in HO Required message?

Suppose I have two eNBs, configured as S1 intra-frequency neighbours and my UE is attached to one of them. There is no X2 connection present between them.
Now, I have done admin down to the source eNB. So, HO process is triggered. As a consequence of this, source eNB sends HO required message to MME.

My query is, in this HO required message, what should be the value of ac-BarringFactor??
Should it be P00 or the last value set before admin down(e.g., P95)?

...